Program for the production of suspended ceilings: drawing, cutting, estimate, orders
We drew the ceiling - the program will lay out the canvas, take into account shrinkage and calculate the estimate. The drawing and calculation live in the same system: a material, product or work is attached to any element of the drawing, and the amount is recalculated immediately, without transferring numbers manually.
Works in the browser. For the production of suspended ceilings.
For workshops that make ceilings and complete orders
The program is made for the production of suspended ceilings: the workshop accepts the order, draws, cuts the canvas, counts the materials and work and issues the finished order for installation.
Suitable for those who are just opening a workshop, and for those who are already working and are stuck with a notebook, tables or several programs between which numbers are transferred manually.
If you have an installation team without its own production, this program is not for you: we work with production.
Just opening a workshop? Start with parsing what is needed to open the production of suspended ceilings.
We drew the ceiling - the estimate was calculated from the drawing
Usually dimensions are transferred from a sheet to a table, from a table to an estimate, from an estimate to a cutting task - and at each transfer you can make a mistake. Here the drawing is inside the order, and the estimate is calculated from it:
- outline of the room with dimensions, angles and internal cutouts;
- cutting the canvas taking into account shrinkage;
- width selection: the program shows which widths are suitable for this drawing, no need to search by price list;
- excess material consumption and additional angles - in separate lines, are considered themselves, even if the overrun is less than the square;
- total area and perimeter of the order, and the profile is converted into pieces of the required length;
- printing an invoice and order - already in the free plan; implementation and auto-calculation from the drawing - from the Basic.
In order not to redo it at your own expense: the program calculates shrinkage and cutting
An error in size in this work is expensive: the canvas has already been cut, and the workshop pays for the alteration. When shrinkage is calculated in your head and cutting is calculated on a piece of paper, it’s easy to make mistakes at any step.
In the program, cutting and calculations with shrinkage are done from the same drawing from which the estimate is calculated: the numbers are not rewritten from one place to another.
A photograph of the measurement can be attached next to the field and drawn while looking at it - the dimensions are entered once. The program checks the constructed contour itself: if the sum of the angles does not agree with the dimensions, it shows how many degrees it diverges by and asks you to double-check the measurement - before cutting, and not after.
In the Professional tariff, special cutting, anti-lens, level, “Tetris” and connection of a laser projection to the cutting table are added to this.
No download required: works in the browser
The program does not need to be downloaded and installed, a separate server is also not needed: the account opens in a browser. You invite employees to your organization; how many of them there can be depends on the tariff; on the free tariff, the number of users is not limited.
Are you looking for where to download a program for calculating suspended ceilings for free? There is nothing to download: the free plan is available immediately after registration.
What the system takes into account
The estimate is just the beginning. The order continues to live in the same system:
- customer orders - drawings and goods in the order, invoice, payment and return, customer debt, order history;
- documents and printing - forms for production, logo and barcode on print, import and export of drawings in DXF and SVG;
- access rights - the manager can close sections and individual actions: create an order and drawing, make payments, delete printed forms;
- money, warehouse and procurement - cash registers and balances, payment journal, balances and cost; in procurement, prices are set based on the last delivery and you can see how much the supplier raised the price, and delivery and unloading can be included in the cost of the goods;
- production - a monitor with stages and deadlines, workers take a stage into work using a barcode, plan and fact by area per shift, output by employee;
- buyer - hints that it’s time to order and what will run out soon.
Sections are included in the tariff: the free one already has printing of forms for production and customer orders - drawings and goods in the order, printing of invoices and orders; payment and debt of clients, documents and exchange from 1С - from Basic; money, warehouse, purchases and access rights - from Standard; production and purchasing - in Professional. What is included in each tariff - in the block "How much does it cost".
Exchange with 1С
Потолок 24 is conceived as one system instead of a combination of “drawing program + accounting program + exchange between them”: the drawing, estimate and order are already in one place, and there is no need to transfer them anywhere.
If accounting has been maintained in 1С for a long time and you do not plan to leave it, there is a two-way exchange with modern versions of 1С. The tariffs include 1С Ceiling, 1С: UNF and 1С: КА - starting from Basic. It is better to sort out what data is transferred for your configuration during the call.
You don't have to go through the whole thing either. If the workshop is used to its own drawing program, you can leave it and keep only accounting in Потолок 24: orders, money, warehouse and production.
“I’m in a notepad, and everything is fine” - where the notepad stops coping
As long as there are several orders per week, the notebook and table are enough, and nothing needs to be changed. Stops being enough in specific places:
- dimensions are copied from the notebook into the estimate, and from the estimate into the cutting;
- two people count the same order and receive different amounts;
- you need to understand how much the workshop earned on a specific order, and not “in about a month.”
Everything that the workshop does in Excel and notebooks is replaced by the free tariff. If at least one of these applies to you, start with it: drawing, automatic selection of materials, printing forms for production and customer orders with printing of invoices and orders, the number of employees is not limited.
Try for freeHow much does it cost
The price is for the entire organization per month, and not for each employee. When paying in advance: for 3 months - 10% discount, for 6 months - 30%, for a year - 50%.
General
- 1 organization
- 100 counterparties
- Unlimited items
- Inviting employees
- Advertisement on the drawing
- No logo on the drawing
- Regular support
Drawing
- Basic drawing functions
- Function production
- Printing production
- Automatic material selection
Sales
- Customer orders
- Drawings on order
- Items on order
- Print invoice, order
General
- 1 organization
- 1000 counterparties
- Unlimited items
- Inviting employees
- No advertising
- Company logo on the drawing
- Priority support
Drawing
- Contour Builder
- Automatic material selection
- Print logo and barcode
- Export DXF, SVG
- Import DXF, SVG
- Seam on the canvas
Sales
- Customer orders
- Drawings on order
- Items on order
- Automatic calculation from a drawing
- Invoice, order, sales
- Payment and Returns
- Payments journal
- Customer debt
- Order history
Integration
- 1С Потолок
- 1С УНФ
- 1С КА
- REST API
General
- 1 organization
- Unlimited counterparties
- Unlimited items
- Inviting employees
- No advertising
- Company logo on the drawing
- Priority support
Drawing
- Contour Builder
- Automatic material selection
- Print logo and barcode
- Export DXF, SVG
- Import DXF, SVG
- Seam on the canvas
Sales
- Customer orders
- Drawings on order
- Items on order
- Automatic calculation from a drawing
- Invoice, order, sales
- Payment and Returns
- Payments journal
- Customer debt
- Order history
Indicators
- Sales and customer KPIs
- Sales schedule
- Revenue by manager
Reports
- Financial
- Management
- Trade and warehouse
- Production
Money
- Cash and balance
- Payments journal
- Transfer between cash desks
- Payment articles
Purchases
- Supplier order
- Goods receipt
- Receipt documents
- Payment to supplier
- Payments journal
- Debt to suppliers
- Extra costs
- Order and acceptance printing
Warehouse
- Remains and cost
- Movements in the warehouse
- Warehouse directory
Rights and settings
- Matrix of rights by role
- Rights in ordering and nomenclature
- Employee Roles
- Drawing calculation settings
Integration
- 1С Потолок
- 1С УНФ
- 1С КА
- REST API
- Marketplaces
- Bitrix 24
- 1C-Bitrix (site)
- PBX telephony
- Cash / Bank
- Direct-Bank
- EDO
- Product marking
General
- Unlimited organizations
- Unlimited counterparties
- Unlimited items
- Inviting employees
- No advertising
- Company logo on the drawing
- Priority support
Drawing
- Contour Builder
- Automatic material selection
- Print logo and barcode
- Export DXF, SVG
- Import DXF, SVG
- Seam on the canvas
- Special cutting
- Antilens
- Level
- Tetris
Sales
- Customer orders
- Drawings on order
- Items on order
- Automatic calculation from a drawing
- Invoice, order, sales
- Payment and Returns
- Payments journal
- Customer debt
- Order history
Indicators
- Sales and customer KPIs
- Sales schedule
- Revenue by manager
Reports
- Financial
- Management
- Trade and warehouse
- Production
Money
- Cash and balance
- Payments journal
- Transfer between cash desks
- Payment articles
Purchases
- Supplier order
- Goods receipt
- Receipt documents
- Payment to supplier
- Payments journal
- Debt to suppliers
- Extra costs
- Order and acceptance printing
Warehouse
- Remains and cost
- Movements in the warehouse
- Warehouse directory
Rights and settings
- Matrix of rights by role
- Rights in ordering and nomenclature
- Employee Roles
- Drawing calculation settings
Integration
- 1С Потолок
- 1С УНФ
- 1С КА
- REST API
- Marketplaces
- Bitrix 24
- 1C-Bitrix (site)
- PBX telephony
- Cash / Bank
- Direct-Bank
- EDO
- Product marking
Production
- Control of release stages
- Ready alert
- Employee production
- Production monitor
- Product cost
- Efficiency monitoring
- Laser (projection)
Purchaser
- Recommends purchasing
- Scarcity
- Will end soon
- Purchase history
General
- Everything from Professional
- Individual limits
- Personal manager
- Support SLA
Implementation
- Turnkey implementation
- Team training
- Advanced Integrations
- Agreement agreement
Prices are recalculated at a fixed settlement rate. The currency for placing an order is determined in your account.
There are still questions - write to Telegram or call: +7 937 707 0024, from 9:00 to 20:00 on weekdays.
Who makes the program
Потолок 24 develops ООО «ЧЕРТЁЖ 24». The same team prepares systems for CNC and furniture production - according to the same principle: a drawing associated with calculation and accounting. Company details - in license agreement.